Home
Detailed Search
Your proposal for improving our märklin database
Add or Overwrite the existing data and press 'SAVE MY PROPOSAL' in bottom left corner
Please be free to do all changes that you consider is needed.
MRW PHOTO
MÄRKLIN PHOTO_update
If not correct - replace the link in the below field with the correct link to the photo on www.maerklin.de
Märklin No
Märklin Article Name
Last märklin Price(RRP) Year
Last märklin € Price(RRP)
KOLL Price Book Year
KOLL € Value Estimate
Catalog Year(s)
Railway Company
Nationality
Era
Locomotive and/or Car Numbers
Text on Locomotive or Cars
Scale
Housing
Colour(s)
Length
Minimum radius
Couplers
Technology
Light
URL to www.maerklin.de
Notes
Type Tals 968 Hinged Roof Car Display 4 German Federal Railroad (DB) type Tals 968 four-axle, high-capacity hinged roof cars. Used to transport moisture-sensitive bulk freight. Reddish brown basic paint scheme. All the cars have 2 transition platforms. 12 cars have a handbrake at one transition platform and 12 do not have a handbrake. Type 665 trucks. The cars look as they did around 1984. Car 1: 31 80 566 7 205-4 Car 2. 31 80 566 7 307-8 Car 3: 31 80 566 7 321-9 Car 4: 31 80 566 7 300-3 Car 5: Car 6: Car 7: Car 8: Car 9: Car 10: Car 11: Car 12: Car 13: Car 14: Car 15: Car 16: Car 17: Car 18: Car 19: Car 20: Car 21: Car 22: Car 23: Car 24: The long unit trains belong to the trains that attract all the attention in the prototype as well as the models. They usually consist of a car type. For example, the Long Henry, is an ore train that was still pulled in the Seventies by the mighty class 043 steam locomotives. It is still remembered very well. There are also freight loads that are very sensitive to moisture and therefore they cannot be transported in cars such as the type Falns 182. Starting in 1982 Talbot thus built 140 units of a car with the designation Tals 968 for the German Federal Railroad. These cars had a hinged roof that protected the load very well, in this case salt for the chemical industry. Visually the type Tals 968 attracted notice due chiefly to its offset roof struts, which lengthened the car body in the upper area at the ends and made it look even more massive. With a weight empty of around 25 metric tons, the freight load can be a maximum of 65 metric tons. So, in the prototype with 24 cars the total load was considerable thus requiring a powerful piece of motive power. Here is where the very powerful class 151 can shine. The type Tals 968 hinged roof car not only runs in unit trains, but it can also be seen in mixed trains. Here as there it always cuts a good figure, either on a layout or in the display case.
Here you can add your comments or message to us in modelrailworkshop
If you want to be contacted, add your email address (however, not mandatory)
Please replace the questionmarks with the left characters to know that you are not a robot.
Home
Save my proposal